22
7.3 Instructions for use POE module
a. Using DuPont line to connect development board and Poe board ， Keep the
corresponding relationship between pin feet of two boards。
b. Choose a Poe enabled switch or router 。Important matters：In order to ensure
the normal operation of the equipment connected to the development board and the
normal GPIO voltage output，normal network bandwidth，Please select a router or switch
that supports both gigabit network card and ieee802.3at standard 。
c. Connect Poe module through LAN port of switch or router。Just use the ordinary
Ethernet cable
d. It can work normally when the development board is not connected to the
power and network，You can get the network address and access the LAN or Ethernet
Summary of Contents for P1
