22
camera, allowing less time for the flash to fully recharge
before firing again.
2.
Night photos or videos appear too bright
a. You will get the best results when the subject is within
the ideal flash range, no closer than 10'(3m) from the
camera. Subjects may appear too light at closer
distances.
3.
Daytime photos or videos appear too bright
a. Make sure that the camera is not aimed at the sun or
other light sources during the day.
4.
Photos with streaked subject
a. In some cases with low lighting conditions and fast
moving subjects, the 8MP or 12MP or 16MP resolution
settings may not perform as well as the 3MP setting.
b. If you have multiple images where fast moving subjects
produce streaks on the photo, try the 3MP setting
instead.
5.
Red, green or blue color cast
a. Under certain lighting conditions, the sensor can become
confused resulting in poor color images.
b. If this is seen on a consistent basis, then the sensor may
need servicing. Please contact our customer service.
6.
Short video clips—not recording to the length set
a. Check to make sure that the SD card is not full.
b. Make sure that the camera has good batteries in it. Near
the end of the battery life, the camera may choose to
record shorter video clips to conserve power.
Date/Time Stamp not appearing on images
Make sure that the "Date Stamp" parameter is set to
"Date/Time".
Photos Do Not Capture Subject of Interest
