Unscrew the
middle hinge (H).
Remove the
plastic plugs lo-
cated on the op-
posite side of the
central hinge
and install them
in the holes oc-
cupied before by the hinge.
4. Remove the low-
er door.
Remove the ven-
tilation grille
which is fixed by
two screws.
Carefully put the
appliance to its
rear side, totally
unscrew the adjustable foot and screw it in the
opposite side.
5. Remove the bottom hinge by unscrewing its fixing
screws.
6. Using a 12 mm spanner, unscrew the hinge pin
and reassemble it on the opposite side of the
hinge.
7. Install the lower
hinge in the op-
posite side, us-
ing the screws
previously re-
moved.
8. Carefully put the
appliance in its
working position
and adjust the level of the appliance by screwing /
unscrewing the adjustable feet at the bottom of
the cabinet using your fingers or a tool.
9. Slide the hole cover out of the ventilation grille by
pushing it in the direction of the arrow and reas-
semble it on the opposite side
H
10. Install the ventilation grille, fixing the screws.
11. Install the lower door.
12. Install the middle hinge (H) in the opposite side.
13. remove the two plugs of the door (I - where avail-
able), discovering the holes for the hinge pins, as-
semble them on the opposite side.
14. Install the upper door.
15. In your documentation bag you will find the upper
hinge necessary to make the reversibility. Put the
hinge in position and screw it.
16. Remove the
handles and fix
them on the op-
posite side. Put
the plastic lids on
the holes that
were situated
where the han-
dles are present-
ly.
Warning!
Reposition, level the appliance, wait
for at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above men-
tioned operations, contact the nearest After Sales Serv-
ice Force. The After Sales Service specialist will carry
out the reversibility of the doors at your cost.
I
Environmental concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
12
