15
STEPS TO COPY PICTURES TO FRAME’S BUILT-IN MEMORY:
STEP 1:
Use SRC Area to select picture from computer’s hard-drive or other
storage devices connected to the computer
STEP 2:
Use PIC Area to edit picture (zoom in, zoom out, crop and rotate)
STEP 3:
Add picture to the Selection Area (by pressing ADD button) to be downloaded
NOTE: Repeat Steps 1 to 3 for all the pictures to be copied to the frame
and then perform STEP 4
STEP 4:
Press Download button in TAG Area to download all newly added
pictures to frame’s built-in memory.
IMPORTANT:
No changes are made to the frame unless “Download”
button is used
Please avoid pulling out the USB cable while downloading pictures, doing so
may destroy information on the frame.
COPYING PICTURES TO AN SD CARD INSERTED IN SD CARD SLOT ON
THE FRAME:
DPFMate350 application is NOT required to copy pictures to the SD card in frames’ SD
card slot.
STEP 1:
Insert SD card in frame’s Card Slot
STEP 2:
Connect frame to the computer using USB cable
STEP 3:
Enable USB Connect Mode by pressing “EXIT” button on the frame
STEP 4:
The SD card in SD Card Slot appears as a USB/Removable Drive under
Windows Explorer (PC) or Finder (Mac)
STEP 5:
Open removable drive (that corresponds to the SD card) - DESTINATION
STEP 6:
Open Source picture files folder in another window - SOURCE
STEP 7:
Drag and Drop JPEG picture files from SOURCE to DESTINATION
NOTE:
DPFMate350 program is not required to copy picture-files to the SD card
