manualshive.com logo in svg

Zoom Zoom player 3000, Operation Manual

Share
Download
Zoom Zoom player 3000 Operation Manual Download Page 48

● 

46

ADVANCED GUITAR EFFECTS PROCESSOR

Troubleshooting

Problem

Check

Remedy

No Sound, or 
Extremely Small 
Sound

•  Is the AC adapter connected correctly
   and the power ON?

Turn the power ON by following the 
instructions, "GETTING CONNECTED".

•  Is the INPUT jack correctly connected to the
   guitar, and the OUTPUT jack to the amplifier?

Connect them correctly by following the 
instructions , "GETTING CONNECTED".

• Is your shielded cable ok?

Try changing your shielded cable.

• Is the connected amplifier's power ON?

Turn the amplifier's power ON.

• Is the volume appropriate for the guitar
   and amplifier?

Adjust the volume to the appropriate level.

• LEVEL parameter of PRE DRIVE, MAIN 
  DRIVE, or EQ effect module set too low? 

Activate Edit mode (page 13 and adjust the 
parameter. 

Turn VALUE knob in Play mode to adjust 
the volume. 

 Operate RP01 foot pedal.

• Is the cut with the EQ effect module
  parameter setting too strong?

Enter the Edit mode (see page13 ) and 
appropriately adjust the levels for each 
parameter.

• Master volume turned down? 

• Volume turned down with RP01 (option) 
  foot pedal?

• Is the 3000 muted?

If the FUNCTION switch mode (see page 18) 
is set to "MUTE", press the FUNCTION 
switch to turn off the mute condition.

Patches Do Not 
Switch

• Is the 3000 in Edit (Manual) mode?

Press FUNCTION switch to return to Play 
mode. 

• Is the 3000 in Store standby status or
  All Initialize standby status?

Press the STORE key to execute the 
operation, or press the EDIT key to leave the 
standby status and return to Play mode.

FUNCTION 
switch cannot 
be used for 
delay time tap 
input or hold 
delay. 

• FUNCTION switch mode set correctly?

 Set FUNCTION switch mode to "3: DELAY 
(TAP&HOLD)" (page 18). 

• Is RP01 (option) connected? 

When RP01 is connected, delay time tap 
input and hold delay operation can be 
carried out only with RP01. 

MAIN DRIVE 
effect module 
cannot be 
activated. 

• Is TALKING BOX effect type selected for 
  PRE DRIVE effect module? 

In Edit mode, select a different effect type for 
PRE DRIVE. If TALKING BOX is selected, 
the MAIN DRIVE effect module cannot be 
activated even if the PRE DRIVE module is 
off. 

Troubleshooting 

If there seems to be a problem with the unit, please check the following points first. 

Summary of Contents for Zoom player 3000





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands