Using WPS to Connect to a Wireless Network
29
If Windows asks you to
Enter the PIN from the router label
(usually 8 digits).
You can go ahead and enter the PIN code
if your Router is labeled with one. If your Router does not
have a label with a PIN code on it or you are unsure if it does,
go ahead and click
Connect using a Security Key instead.
On the next screen enter the wireless security key used by
your network.
5
Windows 8 users only:
When asked “Do you want to turn on
sharing between PCs and connect to devices on this
network?” Click
Yes
to enable sharing and
No
to disable
sharing
Using WPS with the Macintosh
Configuration Utility
The Macintosh Configuration utility can be used to configure your
adapter using either the PIN method or PBC method. The
software only supports entering the PIN used on the USB
adapter; it does not allow you to enter a PIN that is already
configured on your Router. If your wireless network is already
configured using a PIN, follow the instructions in Chapter 5:
Connecting to a Wireless Network in Mac OS X and enter the
PIN when prompted for a Network Key.
To configure your adapter using either a PIN code or PBC
method, follow these steps:
1
Double-click on the Wireless-N USB Configuration utility icon
on the Dock. This opens the wireless configuration
utility.
2
Click on the
WPS
tab.
The
WPS
page will appear:
