3
Quick Start Instructions
Installing the V3 involves five steps:
Installing the Software
,
Installing the Hardware
,
Configuring Internet Explorer
,
Configuring Your V3
, and
Setting Up VoIP Service
.
Step 1: Installing the Software
If your computer has an available Ethernet jack, we recommend
that you use it instead of the USB jack. This will simplify
installation.
If you decide to use the V3’s USB jack, you must remove any
previously installed USB modem drivers on your computer before
installing this software. On the desktop, click the
Start
button,
point to
Settings
, and select
Control Panel
. In
Control Panel
,
double-click
Add/Remove Programs
, on the
Install/Uninstall
tab, select your old USB modem from the list, and click
Remove
.
Now continue below.
1111
Your computer must be on.
Insert the supplied CD into
your computer’s CD drive. The CD should start automatically
and the
Select Language
screen should appear. (If the CD
does not start automatically, on the desktop, click the
Start
button, click
Run
, and then type
D:\setup.exe
, where
D
is
the letter of your CD drive.)
2222
Select your language
and click the
Installation Wizard
button. The software installation proceeds automatically.
3333
When the process is complete, you will be prompted to click
Finish
and then
Shut Down
to turn off your computer so you
can connect the hardware. Remove the CD from your CD
drive after you shut down your computer.
