UIB-02 ONLINE MANUAL
7
5.
If necessary, disconnect the USB cable.
[NOTE]
This procedure must be followed every time you wish to terminate the USB connection between
the computer and the MRS series and turn the MRS series off.
S E T T I N G T H E C O M P U T E R A N D M R S S E R I E S T O T H E
O N L I N E S T A T E ( W I N D O W S 9 8 )
1.
Install the UIB-02 in the expansion slot of the MRS series.
For details on installation, refer to the separate leaflet supplied with the UIB-02.
2.
Turn power to the computer on and start up Windows 98.
3.
Insert the CD-ROM supplied with the UIB-02 into the CD-ROM drive of the
computer.
[NOTE]
The CD-ROM drive letter will be required when installing the driver software. Double-click on
the “My Computer” icon and check the drive letter of the drive where the CD-ROM is inserted.
4.
Start the MRS series in USB mode.
In USB mode, the MRS series acts as a USB device for use with a computer. To
activate the USB mode, proceed as follows.
• MRS-1044/MRS-1044CD
While holding down the [CLEAR] key, press the [POWER] switch on the rear panel to
turn the unit on. When the indication “ROM UTY MRS-1044” appears on the display,
release the [CLEAR] key and press the [AUTO PUNCH IN/OUT] key. The display
now shows the indication “USB WORKING”.
• MRS-1266/MRS-1266CD
While holding down the [CLEAR] key, press the [POWER] switch on the rear panel to
turn the unit on. When the indication “ROM UTY MRS-1266” appears on the display,
release the [CLEAR] key and press the [AUTO PUNCH IN/OUT] key. The display
now shows the indication “I/F WORKING”.
[NOTE]
For information on how to activate the USB mode for other MRS series models, refer to the
documentation of the product.
