38
39
ZOOM MRS-1044 ver 1.2
ZOOM MRS-1044 ver 1.2
Troubleshooting
■
When trying to execute a command, one of the
following messages appears.
[MO drive, ZIP drive, or hard disk related]
●
EMPTY
• • • • • • • • •
Directory does not exist.
●
FULL
• • • • • • • • • • •
Hard disk does not have sufficient space.
●
NO DATA
• • • • • •
No applicable data exist.
●
NO DISK
• • • • • • •
No disc inserted in ZIP/MO drive
●
SAME DIR
• • • • • •
Directory with the same name already exists.
[CD-R/CD-RW drive related]
●
FULL
• • • • • • • • • • •
CD-R/CD-RW disc does not have sufficient space.
●
NO AUDIO
• • • • •
Disc other than audio CD is inserted in CD-R/CD-RW
drive.
●
NO DATA
• • • • • •
No applicable data exist.
●
NO DISC
• • • • • • •
No disc inserted in CD-R/CD-RW drive.
●
NotBLANK
• • • • •
CD-R/CD-RW disc is not blank.
●
NOT CD-R
• • • • •
Disc inserted in CD-R/CD-RW drive is not a
CD-R/CD-RW disc.
[MRS-1044 related]
●
HDD FULL
• • • • •
Internal hard disk of MRS-1044 is full.
●
PRJ FULL
• • • • • •
No more projects can be created on internal hard disk
of MRS-1044.
Troubleshooting
If there are problems during MRS-1044 or SCSI device operation, check
the following points first.
■
MRS-1044 does not recognize SCSI device
●
Check whether SIB-01 is correctly installed.
●
Check whether MRS-1044 system has been upgraded to version
1.2.
●
Check whether SCSI cable is correctly connected, and whether
SCSI device is powered.
●
Check whether SCSI ID setting is appropriate.
●
Check whether terminator is installed in the last device, or internal
terminator has been set to ON. In rare cases, removing the
terminator may improve operation stability.
■
Audio CDs created with the MRS-1044 cannot be
played on an ordinary CD player
●
Check whether the disc was finalized.
●
Check whether the CD player is an old model.
On some old CD players, CD-R/CD-RW discs will not play properly as
audio CDs, even if the disc was finalized.
■
Audio data cannot be written to the CD-R/CD-RW
media
●
Check whether the disc has already been finalized.
■
Backup cannot be performed
●
Check whether the disc already contains other audio data.
●
Check whether the hard disk has enough capacity.
■
A backup spanning multiple volumes cannot be
restored
●
Was the number one disc inserted in the drive first?
Troubleshooting