32
33
ZOOM MRS-1044 ver 1.2
ZOOM MRS-1044 ver 1.2
Deleting
Backup
Data
display.
When the delete operation is finished, the display indication changes
to "DELETE COMPLETE".
8.
To return to the main screen, press the [EXIT] key several
times.
• When wishing to delete backup data spanning several media
volumes, repeat the above procedure for each volume.
• Always verify the directory name, to make sure that you do not
accidentally delete another project.
NOTE
Deleting
Backup
Data
You can delete backup data (directories) from the media used for backup,
if the data are no longer needed.
Once a directory has been deleted, it cannot be restored. Take care not
to accidentally delete a directory that you may still need.
1.
Verify that the SCSI device is properly connected to the
MRS-1044.
2.
When using a MO drive, or ZIP drive, make sure that the
correct disc is inserted.
3.
In the main screen, press the [PROJECT/UTILITY] key.
4.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"UTILITY BACKUP", and then press the [ENTER] key.
If the above menu does not appear, the MRS-1044 has not
properly recognized the SCSI device. Check the power on/off
condition of the device and the SCSI connection.
5.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"BACKUP DELETE", and then press the [ENTER] key.
The screen for selecting the project to delete appears.
6.
Turn the dial to select the project to be deleted, and press the
[ENTER] key.
The indication "DELETE SURE?" appears on the display, to verify
the delete process.
7.
To execute the delete process, press the [ENTER] key. If you
wish to cancel the process, press the [EXIT] key instead.
When delete starts, the indication "DELETE wait..." appears on the
DELETE
PROJ001
NOTE
NOTE
Deleting Backup Data