Zoom LiveTrak L-12 Operation Manual Download Page 15

Page: 15 / 100

Send effect (SEND EFX) section

EFX RETURN MUTE button

⑤

EFX RETURN level meters

⑥

EFX RETURN fader

①

Effect type list

This is the list of the built-in effects.
The name of the currently selected effect lights.
It blinks when being selected.
If some time passes without a different effect being selected, the previously selected effect will remain
selected.

②

TYPE knob

Use to select the built-in effect.
Turn this knob to select the effect type, and press it to confirm.

③

Parameters 1 and 2

Use these to adjust the parameters for the selected effect.
See

Send effects specifications

for the parameters of each effect.

④

EFX RETURN MUTE button

This mutes or unmutes the signal sent from the built-in effect.
To mute the signal, press this button to light it.

Summary of Contents for LiveTrak L-12





































































































Search results

Summary of Contents for LiveTrak L-12

Reviews:

Related manuals for LiveTrak L-12

Brands by name

Popular brands

Zoom LiveTrak L-12, Operation Manual

Search results

Summary of Contents for LiveTrak L-12

Reviews:

Related manuals for LiveTrak L-12

Brands by name

Popular brands