12
Recording/overdubbing and playing tracks
The
has recorder functions that enable simultaneous recording of up to 12 tracks and
simultaneous playback of up to 10 tracks. The input signals of every channel and from the
master fader output can be recorded and played back.
Recording
3
5
6
2
4
1
1.
Press
to light it.
2.
Use
to turn overdubbing on or off.
• Lit (ON): Overwrite the current project
• Unlit (OFF): Create a new project and record in it
3.
Press
for the channels you want to record, lighting them red.
4.
Press
to light it and start recording standby.
If a recorded file already exists in the current project, and
is off, pressing
will cre-
ate a new project and then start recording standby.
HINT
5.
Press
to light it and start recording.
6.
Press
to stop recording.
NOTE
When recording stops, “Please wait” appears on the display. Do not turn the power off or re-
move the SD card while this message appears. Doing so could cause data loss or malfunction.
See the Operation Manual for information about punching in/out, automatic recording and
pre-recording.
HINT
