Zoom F8n Operation Manual Download Page 72

Page: 72 / 198

Tak

e and folder operations

riting sound repor

ts (Create S

ound R

epor

Writing sound reports (Create Sound Report)

(continued)

Writing a sound report

Use

to select

Create

and press

Use

to select

Yes

and press

This writes the sound report
inside the selected SD card or
folder.

NOTE

•

Only information about takes in the folder or SD card is written
in the sound report.

•

If a sound report file with the same name already exists, it will be
overwritten. Please use caution.

Editing comments

Use

to select

Info Edit

and press

Use

to select

Comments

and press

Use

to select

Edit

and press

Edit the comment.

See "Character input screen"
(

→

P.13) for how to input

characters.

Summary of Contents for F8n







































































































































































































Search results

Summary of Contents for F8n

Reviews:

Related manuals for F8n

Brands by name

Popular brands

Zoom F8n, Operation Manual

Search results

Summary of Contents for F8n

Reviews:

Related manuals for F8n

Brands by name

Popular brands