Zoom F8n Operation Manual Download Page 139

Page: 139 / 198

Disabling the slate mic

You can set the slate mic so that it will not be enabled if

is accidentally pushed left toward the mic symbol.

Use

to select

On/Off

and press

Use

to select

Off

(Lock)

, and press

Recording

Press

to start recording.

Push

left toward the mic symbol and release.

To disable the slate mic, push

left toward the

mic symbol again and release.

NOTE

•

When the slate mic is in use, other signals input to the tracks that
it is routed to are muted.

•

The slate mic signal is always routed to the headphone L/R chan-
nels regardless of other routing settings.

•

The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the
levels of the slate mic and slate tone.

HINT

If you push and hold

left toward the mic symbol for two or

more seconds, the slate mic will be enabled until you release the
switch.

Slate mic/slate tone

ecording with the slate mic (Slate Mic)

139

F8n

Multi Track Field Recorder

Summary of Contents for F8n







































































































































































































Search results

Summary of Contents for F8n

Reviews:

Related manuals for F8n

Brands by name

Popular brands

Zoom F8n, Operation Manual

Search results

Summary of Contents for F8n

Reviews:

Related manuals for F8n

Brands by name

Popular brands