Zoom F4 Operation Manual Download Page 4

Page: 4 / 160

Contents

Contents

Usage and Safety Precautions  . . . . . . . . . . . . . . . . . . . . 02
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Names of parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
Connecting mics/other devices to Inputs 1–6  . . . . . . . . 08
LCD display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

Preparations

Supplying power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Loading SD cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Turning the power on and off . . . . . . . . . . . . . . . . . . . . . 17
Setting the date and time (Date/Time (RTC)) . . . . . . . . . 18
Setting the power supply used (Power Source) . . . . . . 20

Recording

Recorded take settings

Changing the note for the next take recorded (Note) . . 40
Setting how recorded scenes are named and
numbered (Scene) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Setting the take reset condition and numbering
format (Take) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Changing the track name of the next take recorded
(Track Name) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Playback

Playing recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Mixing takes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Changing the playback mode (Play Mode) . . . . . . . . . . 51

Take and folder operations

Take and folder operations (Finder) . . . . . . . . . . . . . . . . 52
Overview of take metadata stored in files . . . . . . . . . . . 59
Checking and editing take metadata (Metadata Edit) . . 60
Writing a sound report (Create Sound Report) . . . . . . . 67

Input settings

Output settings

TIMECODE

Setting the user bits for internal timecode (Ubits)  . . .  113
Setting how timecode is initialized at startup
(Start Timecode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  115

Slate tones

Using slate tones (Slate Tone) . . . . . . . . . . . . . . . . . . . . 116

Using USB functions

Exchanging data with a computer (SD Card Reader) . .119
Using as an audio interface (Audio Interface) . . . . . . . 120
Audio interface block diagrams . . . . . . . . . . . . . . . . . . 122
Audio interface settings . . . . . . . . . . . . . . . . . . . . . . . . . 124

Using an

Using an

as a controller (Connect) . . . . 125

Setting the

connected keyboard type

(Keyboard type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Setting user keys for the

(User Key) . . . 127

Setting the power supply used by the

(Power Source) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Powering the

with USB bus power

(USB Bus Power) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Setting the

LED brightness

(LED Brightness) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Updating the

firmware . . . . . . . . . . . . . . 131

Various settings

Setting the level meter display (Level Meter)  . . . . . . . 133
Making display settings (LCD) . . . . . . . . . . . . . . . . . . . . 136
Setting the LED brightness (LED Brightness) . . . . . . . . 138
Setting how marks are added manually
(PLAY Key Option)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Other functions

Checking SD card information (Information) . . . . . . . . 141
Testing SD card performance (Performance Test) . . . . 142
Formatting SD cards (Format) . . . . . . . . . . . . . . . . . . . . 144
Checking the

shortcut list (Shortcut List) . . . . . 145

Restoring default setting values (Factory Reset) . . . . . 146
Checking the firmware version (Firmware Version) . . 147
Updating the firmware . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Appendix

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Detailed product diagrams . . . . . . . . . . . . . . . . . . . . . . 150
Metadata list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
List of shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Summary of Contents for F4

































































































































































Search results

Summary of Contents for F4

Reviews:

Zoom F4, Operation Manual, Page: 4 / 160

Search results

Summary of Contents for F4

Reviews: