manualshive.com logo in svg

Zoom F4, Operation Manual, Page: 131 / 160

Share
Download
Zoom F4 Operation Manual Download Page 131

F

 Multi Track Field Recorder

Updating the 

R

ÄYT^HY

L

Using an 

R

131

Updating the 

R

 firmware

1. 

Connect the 

F

 and the 

R

, referring 

to "Using an 

R

 as a controller (Connect)" 

(

→

 P.125).

NOTE

Updating the firmware is not possible if the remaining bat-
tery or DC power supply charge is low. In this case, replace 
the  batteries  with  new  ones  or  use  a  charged  DC  power 
supply.

2. 

Copy the file for updating the firmware to the root 

directory on an SD card.

3. 

Load the SD card into the SD CARD 1 slot.

NOTE

If an SD card is loaded in the SD CARD 2 slot, eject it.

4. 

Press 

m

.

5. 

Use 

e

 to select USB,  

and press 

E

.

6. 

Use 

e

 to select FRC-8,  

and press 

E

.

▶

 Continue to one of the following procedures.

Checking the firmware version ....................................................... P.132
Updating the firmware .................................................................... P.132

You can check the 

R

 firmware version and update it to the latest version.

An update file for the latest version can be downloaded from the ZOOM website (www.zoom.co.jp).

Summary of Contents for F4

































































































































































Reviews:

No comments