manualshive.com logo in svg

Zoom ComStar SVD, Owner'S Manual, Page: 52 / 68

Share
Download
Zoom ComStar SVD Owner'S Manual Download Page 52

ComStar SVD Owner’s Manual

52

Voice Commands

 ComStar SVD supports the following voice commands in
response to the AT#CLS=8 command, which sets the voice/audio
mode. Commands marked with an asterisk (*) will function only in
this mode. Others will be recognized in any mode (data, Class 1
fax, Class 2 fax, or voice/audio).

Commands

Function (*voice mode only)

A

Answering in voice/audio mode.

D

Dial in voice/audio mode.

H

Hang up in voice/audio mode.

Z

Reset in voice/audio mode.

#BDR=0

Enables autobaud detection on the DTE interface

#BDR=

n

Forces baud rate for 1<

n<48 (turns off autobaud), where

the speed is defined as 

n×2400 bps. For example, if n=1,

speed is 2400 bps; if 

n=48, speed is 115,200 bps.

#CID=0

Disables Caller ID.

#CID=1

Enables formatted Caller ID reporting.

#CID=2

Enables unformatted Caller ID reporting.

#CLS=0

Selects data mode.

#CLS=1

Selects Class 1 fax mode.

#CLS=2

Selects Class 2 fax mode.

#CLS=8

Selects voice/audio mode.

#MDL?

Requests the model number or name of the modem.

#MFR?

Requests the modem manufacturer.

#REV?

Requests the revision level.

#TL=

n*

Adjusts the transmit level of the data pump audio output,
where 

n=0000–7FFF. Default is 7FFF if local handset

or speaker is selected, or 3F44 if phone line is
selected.

#VBQ?*

Requests the size of the voice transmit and receive buffers.

#VBS=

n*

Selects the degree of ADPCM compression, where 

n=2 or

4, or 8 (PCM) bits per sample. The default is 4.

#VBT=

n*

Defines the duration of tones generated by the D
command, where 

n=0–40 tenths of a second (i.e., 0–4

seconds). The default is 10 (one second). If n=0, tone
generation is disabled.

#VCI?*

Requests the compression method and raw bits/sample.

#VLS=0*

Selects a device to be routed through the modem.
#VLS=0 is telephone line.

Summary of Contents for ComStar SVD





































































Reviews:

No comments