manualshive.com logo in svg

Zoom ComStar SVD, Owner'S Manual, Page: 40 / 68

Share
Download
Zoom ComStar SVD Owner'S Manual Download Page 40

ComStar SVD Owner’s Manual

40

Appendix B: Setting the Modem’s Audio
Jumpers

Though your modem comes with an electret microphone and an
unpowered external speaker, you may want to use other
microphones or speakers with the speakerphone feature. If that
is the case, the modem has four jumper blocks that are used to
control the microphone input and speaker output. Each of these
jumper blocks has one black jumper in place on it.

NOTE: Remove the faxmodem from your PC and orient it
component-side up, with the metal faceplate facing to the right
and the gold teeth pointed down.

J25

J16

J10

J6

Q

The first jumper block, shown in the diagram next to the callout
J25, controls microphone bias.

For an electret microphone, like the one supplied with your
faxmodem, leave the jumper in place. For a dynamic microphone,
remove the jumper. We do not recommend the use of a dynamic
microphone.

Q

The second and third jumper blocks, shown in the diagram next to
the callouts J6 and J10, control the audio output level to the

Summary of Contents for ComStar SVD





































































Reviews:

No comments