Other Functions
ZOOM B2.1u
21
1.
Turn power to the B2.1u on while
keeping the [PEDAL ASSIGN] key
depressed.
The indication "dn" appears on the display.
2.
With the expression pedal fully raised,
press the [STORE] key.
The display indication changes to "UP".
3.
Push the expression pedal fully down
and then lift your foot off the pedal.
4.
Press the [STORE] key once more.
The expression pedal adjustment is completed,
and the unit returns to the play mode.
HINT
• The point where the module is switched on or off
when the pedal is depressed is always the same,
regardless of the action taken in step 3.
• If "Er" appears on the display, repeat the procedure
from step 2.
Using an external
expression pedal (FP01/
FP02)
When you connect an optional expression pedal
(FP01/FP02) to the [CONTROL IN] jack of the
B2.1u, you can use that pedal as a volume pedal,
separately from the built-in expression pedal.
1.
Plug the cable from the external
expression pedal into the [CONTROL
IN] jack, and then turn the B2.1u on.
2.
Operate the external expression
pedal in play mode or edit mode.
The volume changes.
HINT
The external expression pedal always functions as a
volume pedal.
Using a foot switch (FS01)
Connecting an optional foot switch (FS01) to the
[CONTROL IN] jack of the B2.1u allows bank
switching in play mode. It is also possible to
switch bypass/mute on and off, control the tap
tempo function, or perform other functions with
the foot switch.
1.
Plug the cable from the FS01 into the
[CONTROL IN] jack, and then turn the
B2.1u on.
2.
Set the Module selector to the
"CONTROL" position.
The B2.1u goes into edit mode. You can now
make settings for the expression pedal or foot
switch.
D N
Push strongly,
so that pedal touches
here.
When foot is lifted,
pedal returns slightly.
