Chapter 5 Configuring Custom Settings
47
Configuring the Security Settings
Click the middle
Change
button to change the default WEP
Encryption Key of your IG (the new string must contain five
characters). Type a new Key in place of the default (see the
section Changing the Default WEP Encryption Key on
page
48
and the WEP Booklet). Select
Enable password
(disabled
by default) and type a password to restrict access to the IG
Setup Utility. If you want to reset the default values, click
Set
defaults
and
Ok
.
Viewing the Network Topology Settings
To access your Network Topology settings, click the bottom
Change
button. The following dialog box opens:
For information, click
Help
. If you want to change the settings
in the dialog box, consult your network administrator.
3
Before you click
Finish
in the
Overview Of Your Settings
screen, you can double-check all the IG settings. Use the
Back
button on the bottom of the screen to return to the previous
screens.
4
Click
Exit
in the
Ready!
screen:
You have configured your IG to serve as a transparent wireless
bridge in a LAN infrastructure environment. Go to Checking the
IP Address on
page 29
for an explanation of an important part of
the configuration process.
