9
GB
Avoid risk
of injury
Do not change the accessories
while the product is switched on.
Do not use the product if you
detect any kind of visible, exter-
nal damage. Never use a da-
maged product.
If liquid gets into the product,
check before using the product
once more.
If you notice that the supply
cord, plug, housing or another
part has become damaged, the
product can no longer be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must al-
ways be replaced with original
spare parts. Only by using ori-
ginal spare parts can you ensure
that safety requirements are met.
Connect plug to an outlet which
is well within reach.
Never use the product unsu-
pervised and only use it in
accordance with the information
stated on the type plate.
The tips of the attachments are
sharp.
Switch off the product before
attaching or switching the at-
tachments, as well as before
cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product if you
have an open wound, cut,
sunburn or blister.
Avoid the danger of
damage to property
Electrical products may pose a
hazard to animals. Animals can
also damage the product. Al-
ways keep animals away from
electrical products when it is
not in use.
Protect the product from moisture,
drops of water and splashing
water.
Ensure that the supply cord does
not get stuck in cupboard doors
and that it is not pulled over hot
surfaces. This could damage
the supply cord‘s insulation.
Use the original accessories only.
Summary of Contents for 354622 2010
Page 3: ...A 3 5 2 4 1...
Page 4: ...C D 6 1 6 B 7 8 9 6...