ZOODOS 66157, Instruction Manual

Page: 36 / 57

36
GB
Declaration of compliance
We hereby declare that
TILE CUTTER
66157 (TS2005)
230 V - 1,200 W
has been manufactured in accordance
with the following standards or normative
documents:
EN61029-1:2009
EN12418/A1:2009
EN55014-1:2006
EN55014-2/A1:2001
EN61000-3-2:2006
EN61000-3-3/A2:2005
in accordance with the provisions of the
following directives
2006/95/EEC The Low Voltage Directive
2004/108/EEC The EMC Directive
2012
Stefan Schou
Business Unit Manager
16.05.2012 - HP SCHOU, DK-6000 Kolding, Denmark
Environmental information
HP SCHOU endeavours to manufacture
environmentally-friendly electrical and
electronic products; we also wish to
contribute to the safe disposal of waste
substances which may be environmentally
hazardous.
A healthy environment is of benefi t to all
of us and, for this reason, we have set as
our goal the upholding of EU’s initiatives in
this area. Thus, we hope to have a system
in place for the responsible collection,
treatment, recycling and disposal of
electrical equipment, which may otherwise
present a risk to the environment. This also
means that our products do not contain any
of the following chemicals or substances:
- Lead
- Mercury
- Cadmium
- Hexavalent chromium
- PBB (polybrominated biphenyls) (fl ame
retardants)
- PBDE (polybrominated diphenyl ethers)
(fl ame retardants)
HP SCHOU is proud to support the EU’s
environmental initiatives in order to play a
part in a cleaner environment and hereby
declares that our products comply with
both the WEEE Directive (2002/96/EC) and
the RoHS Directive (2002/95/EC).
As a consumer, you can also play a part in
protecting the environment by following
the applicable environmental regulations
and taking old electrical and electronic
equipment to your local recycling centre.
If the equipment contains batteries, you
must remember to remove these before you
dispose of the equipment.