©2017 ZOO FANS INC. ALL RIGHTS RESERVED
1650 38
th
St, Suite 201W Boulder, CO 80301 PHONE: 303-557-1852
zoofans.com
REV 05182017
STEP 2: Fasten Stabilization Tether
Use the hardware from the white bag
labeled “Bag 2 of 2”
containing the 12’ cable with eyelet, and
attach the
stabilization tether to
either attachment point located at 45° on each side of the fan’s
handle as shown in
, below.
TIP
: When attaching these cables, leave the cables wound, as shipped, until you are ready to hang the fan.
1.
Insert 1/4
”
Hex Head bolt through the Eyelet of Gripple
2.
Insert 1/4
”
Hex Head bolt through the hole located at 45° on either side of the handle
3.
Securely tighten
1/4”
Nylock Nut
Illustration 2
