Indoor Positioning System
Priority 1
Priority 2
NOTE:
Your adapter may mute your radio speaker, causing incoming calls to be missed, in any of the following situations:
1. The adapter is attached to the radio and no wireless headset or wired accessory is paired.
2. Your wireless headset is turned off or runs out of battery power.
3. Your wireless headset goes out of range of the BSA-93001 adapter.
4. Local interference causes the BSA-93001 adapter and the wireless headset to lose pairing.
Communication Priority
Priority 1 - Audio accessory connected to Quick Disconnect Port
Priority 2 - Wireless Bluetooth devices
STATUS LED MESSAGES
The meanings of the various
status LED messages shown by
the BSA-93001 Adapter are
shown on the following table:
Model information
Bluetooth Side Adapter for
Motorola two-way digital radios,
type MOTOTRBO
Model No.: BSA-93001
Made in Taiwan
FCC ID: XTS-BTD-1M3
No indication
Radio is turned off
One flash per 4 seconds
Normal operation
Two flashes per minute
Audio accessory pairing mode active
One long flash for three seconds
Successfully paired or re-paired
Status
LED
TROUBLESHOOTING Question & Answer’s
My wireless audio accessory will not pair with the Adapter.
Follow the instructions to place the BSA-93001 Adapter into the correct pairing mode and then activate the pairing mode
on the accessory. Make sure that the BSA-93001 Adapter and accessory being paired are within one meter of each
other.
My wireless audio accessory or worked before, but is not working now.
Make sure that the BSA-93001 Adapter is properly connected to the two-way radio and that the radio is turned on.
Ensure that your wireless audio accessory has a fully charged battery and is turned on. If the devices will still not work,
re-pair the BSA-93001 Adapter to the wireless accessories.
My radio shows "Keyloader" on the LCD when I press the Talk button of the Adapter.
When your press the talk key with no wireless headset paired, the radio believes a keyloader is attached to the radio.
Disable the keyloader function in the radio's programming software or pair a wireless accessory with the adapter.
SUPPORT AND WARRANTY
We warrant this product against defects in materials or workmanship for a period of one year from the date of retail
purchase. We will repair or replace a defective unit, at our option, without charge for parts or labour. The limited
warranty is extended only to the original purchaser. It does not cover damage or failure caused by or attributable to Acts
of God, abuse, misuse, improper or abnormal usage, faulty installation, improper maintenance, lightning, or other
incidences of excessive voltage, or any tampering or repairs by other than a Zonith authorized repair facility. It does not
cover replacement of consumable parts, transportation costs, or damage in transit.
