Indoor Positioning System
STEP TWO: Pairing with an Audio Accessory
1. Turn off the radio that the BSA-93001 Adapter is connected to. Wait at least three seconds.
2. Turn the radio on while holding down the Talk button on the BSA-93001 Adapter.
3. Continue to hold the Talk button down for approximately three seconds. Release the Talk
button when the status LED begins to flash two times per second.
4. The BSA-93001 Adapter is now in audio accessory pairing mode. Activate the pairing
mode on
5. your compatible wireless audio accessory.
6. Once the wireless audio accessory and BSA-93001 Adapter are paired with each other,
the status LED on the adapter will show a constant blue light for three seconds.
7. If the BSA-93001 Adapter does not detect a compatible wireless accessory within 60
seconds of being put into pairing mode, the adapter will exit the pairing mode and resume
normal operation.
8. Once successfully paired, you will be able to operate your two-way radio using your compatible
wireless accessory.
STEP FOUR: Transmit and Receive Operation
The BSA-93001 Adapter will automatically route radio calls based on the following priority:
1. If an audio accessory is connected to the Quick-Disconnect Port of the BSA-93001 Adapter,radio calls will be routed
to this accessory.
2. If no wired accessory is connected, calls will be routed to a wireless accessory, if one is paired with the BSA-93001
Adapter.
3. If no wireless headset or audio accessory is paired to the BSA-93001 Adapter or the wireless accessory is turned
off, received calls will be muted and will not be heard as long as the BSA-93001 Adapter is attached.
NOTE:
When a new accessory is connected, paired, disconnected, or powered off, it may take several seconds for the
audio from received radio calls to be routed appropriately.
Push-to-Talk can be activated by any of the following methods:
1. Pressing and holding the Talk Switch button of the BSA-93001 Adapter.
2. Using the PTT button on a wired Quick-Disconnect accessory (if one is connected to the BSA-93001 Adapter).
When transmitting, the operator’s voice is picked-up by:
1. The microphone in the wired-audio accessory connected to the Quick-Disconnect port on the BSA-93001 Adapter.
2. If no audio accessory is paired with the BSA-93001 Adapter, or the paired wireless audio accessory is turned off, the
internal microphone in the attached two-way radio will be muted as long as the BSA-93001 Adapter is attached to
the radio.
3. If no audio accessory is paired with the BSA-93001 Adapter, or the paired wireless audio accessory is turned off, the
internal microphone in the radio will be used.
STEP THREE: Using a Quick-Disconnect Wired Audio Accessory (Optional)
The Quick-Disconnect port on the BSA-93001 Adapter allows the
connection of a compatible wired QD series accessory. This includes
compatible earphones, surveillance kits, remote microphones, and Push-
To-Talk accessories.
1. To connect a wired accessory, first turn off the radio.
2. Lift and remove the protective cap on the Quick-Disconnect port on the
BSA-93001 Adapter to expose the connector.
3. Align the Quick-Disconnect connector of the audio adapter with the
Quick-Disconnect port and push the connectors together gently until
they click into place. NOTE: The male and female ends of the quick
release connectors are keyed.
4. To remove a wired accessory, gently lift the outer cover of the Quick-
Disconnect connector until the accessory is released and then pull up
to remove the accessory.
The BSA-93001 will mute both the internal microphone and speaker of your portable radio if no wireless audio
accessory is paired and no wired audio accessory is connected to the Quick Disconnect port. You should detach the
BSA-93001 from the radio when no audio accessory is in use.
