27
SMTP Server:
Specify the IP address or host name of the SMTP server you wish to
use.
SMTP Port:
Specify the port number of the SMTP server you wish to use. Default
value is
25
.
SMTP Auth:
Select
Enable
if your SMTP server requires authentication, select
Disable
if it’s not required.
SMTP Account:
Input the SMTP account (username) of your SMTP server. In most
cases, it’s the same with your POP3 username.
SMTP Password:
Input the SMTP password of your SMTP server. In most cases, it’s
the same with your POP3 password.
OK:
Save settings in this tab.
7.1.2.3 Security
To prevent other people to access IPCam Surveillance Software, you can set a password
to protect it.
Enable:
Requires password authentication when software starts.
Disable:
Password authentication is not required when software starts.
Password:
Input the password you wish to use.
Confirm Password:
Input the password you wish to use again.
