14
3. After the USB device(s) are connected to the USB HUB, the Network USB over IP Server
setup utility will automatically display the connected USB device(s). If you do not see the
USB device(s) that are connected, press “
Search
” button to refresh the list.
Disconnecting an USB Device
1. To disconnect an USB device, simply click on the connected USB device on the list of the
Network USB over IP Server setup utility, and press the “
Disconnect
” button. The device
will then no longer stay connected to your computer, however, you may reconnect the
USB device again once the icon becomes green( ).
Note:
If your USB device does not show up on the list, please try to disconnect and reconnect
the USB device to the USB HUB. Also, please make sure the Network USB over IP
Server and your USB HUB are powered on.
