Zonet ZSR1114WE User Manual Download Page 51

Page: 51 / 71

USER’S MANUAL OF WLAN BROADBAND ROUTER

Version: 1.0

Active Protocol

ESP.

Encryption Algorithm Click to select

3DES

AES128

NULL

encryption.

Authentication

Algorithm

Click to select

MD5

SHA1

authentication.

Key Life Time

Fill in the key life time value by seconds.

Encapsulation Tunnel

mode.

Perfect Forward

Secrecy (PFS)

Click to select

NONE

Ok Click

the

button to save current tunnel settings.

Cancel Click

the

Cancel

button to close current window without

any changes.

3.3.18

Management - Statistics

This page shows the packet counters for transmission and reception regarding

to wireless, Ethernet LAN and Ethernet WAN networks.

Screen snapshot – Management - Statistics

Item

Description

Wireless LAN

Sent Packets

It shows the statistic count of sent packets on the wireless

LAN interface.

Wireless LAN

Received Packets

It shows the statistic count of received packets on the

wireless LAN interface.

Ethernet LAN

Sent Packets

It shows the statistic count of sent packets on the

Ethernet LAN interface.

Ethernet LAN

It shows the statistic count of received packets on the

Summary of Contents for ZSR1114WE








































































Search results

Summary of Contents for ZSR1114WE

Reviews:

Related manuals for ZSR1114WE

Brands by name

Popular brands

Zonet ZSR1114WE, User Manual

Search results

Summary of Contents for ZSR1114WE

Reviews:

Related manuals for ZSR1114WE

Brands by name

Popular brands