USER’S MANUAL OF WLAN BROADBAND ROUTER
Version: 1.0
26
change the setting for IP address, subnet mask, DHCP, etc.
Screen snapshot – LAN Interface Setup
Item
Description
IP Address
Fill in the IP address of LAN interfaces of this WLAN
Broadband Router.
Subnet Mask
Fill in the subnet mask of LAN interfaces of this WLAN
Broadband Router.
Default Gateway
Fill in the default gateway for LAN interfaces out going
data packets.
DHCP Server
Click to select
Disabled
,
Client
or
Server
in different
operation mode of wireless broadband router.
DHCP Client Range
Fill in the start IP address and end IP address to allocate a
range of IP addresses; client with DHCP function set will
be assigned an IP address from the range.
Show Client
Click to open the
Active DHCP Client Table
window that
shows the active clients with their assigned IP address,
MAC address and time expired information.
[Server
mode only]
802.1d Spanning Tree Select to enable or disable the IEEE 802.1d Spanning
Tree function from pull-down menu.
Clone MAC Address
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
