9. Select
Standard Process
.
10. In the
Queue Name
option, type in a printer name. For example: printer-1
11. In the
Host Name
option, type in the IP address of the Print Server.
Note:
You can add the host name associated with the IP address in the /etc/hosts file. If you
have done this, please use the host name instead of the IP address.
12. I n the
Name of Queue on Remote Server
option, type in a print queue name. For
example: printer-1-q.
13. Done.
Redhat Linux 9
The Print Server can work under any Linux-based systems, including Slackware, RedHat,
etc, without any problems.
Basically, the Linux's printing system is based on BSD system. Although many commercial
Linux systems are available in the market and their commands will vary slightly, depending
upon which version is used, the functionality of the Linux-based variants is exactly the same.
Following are the outlined procedures (
recommended for all users
) on Red Hat Linux
7.2/7.3 or later with
X-Window
system installed.
a. Make sure that the TCP/IP is well configured on your RedHat system, including
network interface card's driver and IP-related settings say, IP address, subnet mask,
and gateway IP).
b. Log in
root
.
c. Assign Print Server an IP address. At shell mode:
c.1. arp -s <the IP address you want to assign to the Print Server> < Print Server
's Node ID>
c.2. Execute tftp < Print Server 's IP> get config.txt and quit tftp.
c.3. Edit the config.txt and modify the IP address, subnet mask, and gateway IP.
When done, save the config.txt.
c.4. Execute tftp <Print Server 's IP> put config.txt and quit tftp.
d. Start X-windows by typing
startx
at the shell mode.
e. Open
Printer Configuration
.
56
