Before you start, you should prepare:
One Win9X/Me/2000/XP/2003 computer with CD-ROM
One Printer with USB port
Hardware Installation
To install the print server(s), you need to complete these steps:
˙
Confirm that your printer port work well.
˙
Connect the print server to the network and printer(s) and plug in the print server.
˙
Create a configuration page from the print server.
Follow these instructions to install the print server(s), please refer to any peripheral
you are connecting to the print server:
1. To ensure your printer(s) work well, do one of the following:
˙
Send data through the parallel (USB) port of each printer you are connecting to the
print server, or generate a printer self-test page.
2. Turn off the power for each printer.
3. Connect the print server to printer(s).
Note:
One port print server attaching only one printer; further three ports print server can
expand three printers.
4. Plug the AC power adapter to the print server.
5. Power on the Print Server.
6. Check the LED’s marked as
Status
on topside or beside of the print server. It should be
flash
five
times normally, if not, please contact your local dealer for repair or replacement.
7. Turn on the power of your printer(s) to begin printing.
5
