background image

802.11n  Wireless  USB  Adapter 

 

Chapter 1 Introduction 

 

1.1 Welcome 

 
Thank  you  for  purchasing  Zonet  ZEW2540P-802.11n  wireless  USB  adapter. 
ZEW2540P connects you with IEEE802.11n networks at receiving rate up to an 
incredible  150Mbps!  By  using  the  reflection  signal,  802.11n's  “Multiple  In, 
Multiple Out” (MIMO) technology increases the range and reduces “dead spots” in 
the wireless coverage area. 

 

Soft AP supported by ZEW2540P can help you establish wireless LAN networking 
with  lowest  cost.  Besides,  WPS  (Wi-Fi  Protected  Setup)  simplify  the  security 
setup  and  management  of  Wi-Fi  networks.  Supports  WMM  for  Multimedia 
Applications with Quality of  Service in  Wi-Fi® Networks.  Especially supporting 
PS3, PSP, Nintendo DS and Wii connections with XLink Kai software will be your 
best choice to enjoy on-line gaming.   
 
 

1.2 Product Feature 

     

 

Complies with IEEE 802.11n, IEEE 802.11g and IEEE 802.11b standards 

 

Provides USB2.0 port 

 

Provides 150Mbps receiving rate and 150Mbps sending rate 

 

Supports 20MHz/40MHz frequency width 

 

Auto-detects and changes the network transmission rate                                                                                                                     

 

Provides two work modes: Infrastructure and Ad-Hoc 

 

Supports Soft AP to establish your wireless LAN networking     

 

supports PS3, PSP, Wii and Nintendo DS connecting with Internet and 
Xlink Kai to enjoy on-line gaming                                                                             

 

Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1x 
security authentication standard 

 

WPS (Wi-Fi Protected Setup) simplify the security setup and management 
of Wi-Fi networks.   

 

Supports WMM for Multimedia Applications with Quality of Service in 
Wi-Fi® Networks

 

 

 

Supports Windows 2000 / XP / Vista / 7       

 
 

1.3 Contents of Package   

 

 

One ZEW2540P 

 

One Installation CD w/User Manual 

 

One Quick Installation Guide 

 

One USB cable 

 
Contact your local authorized reseller or the store purchased from for any items 
damaged and/or missing. 

Summary of Contents for ZEW2540P





























Reviews: