3. Select
“Yes”
and click
“Finish”
to restart computer.
4. After reboot, insert the Wireless LAN CardBus Card / PCI Adapter into your PC, and the Windows System will
install the rest of the driver automatically.
5. You may see the driver doesn’t have the Microsoft Digital Signature. This software is tested and works correctly
with Windows. Select
“
Yes
“
Note 1:
After installing a new network adapter, Windows automatically configures the TCP/IP protocol to
automatically obtain an IP address from a DHCP server. Depending on your
setup, you may want to consider
specifying a fixed IP address for your new wireless adapter.
Note 2:
If the Configuration & Monitor Utility icon is not shown on system tray, it means the installation is not
successful. Select
“Uninstall
Wireless Network Utility”
in program folder to remove this device, and restart
your computer to make the changes effective.
How to setup the after burner 125 Mbps turbo mode
1.Choose the ‘Control Panel “ and select “Network”. Double click “Network’ and you will see all the network
component. Choose the Broadcom 802.11g Network adapter and click “Properties”
2
