Prepare to print - Load Filament
NOTE:
1. We have only open one channel of the hotend when the printer left the factory, so please
load one filament the hotend in your first prints.
2. Before loading more than one filament to the hotend, please read this guide first “Mix Color
HOTEND User Guide- load and unload filament.pdf” file in the SD card
1. Check the hotend, make sure only the center channel of the hotend connected “filament guide”
and the others channels has been closed by hotend clean tools (
Fig 1).
2. Do
“Prepare>>Auto Home>>Home All”
on control panel, and then do
repare>>Temperature>>
Preheat PLA
”
, w
aiting nozzle Temperature reached to 190
℃
(
Fig 2).
3. Use a diagonal pliers to cut off the head of filament (
Fig 3
), and then press the handle of the
extrude feeder #1
and insert filament, push the filament until you can see the filament in the
guide (
Fig 4
).
4. Rotate the gear of extrude feeder #1(
Fig 5
), watch the filament until it enter the hotend.
Continue to rotate the gear
slowly
and watch the nozzle, until you can see the filament flowed
out from the nozzle(
Fig 6
).
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6
21
Summary of Contents for Z8PM4 Pro
Page 1: ...Model Z8PM3 4 Pro User Guide...
Page 15: ...Wiring Block...