C9154 Installation - pg. 7
Figure 10
15.
Locate the brake lines on the driver’s side frame rail at the front driver’s side
wheel well. Remove the brake lines from the retaining clip
Figure 11
. Check for
any other lines, hoses or wires in this area that may not have enough slack to
compensate for 1.5” of lift. Mark these lines, hoses or wires and disconnect.
Figure 11
»
p
arking
B
rake
c
aBle
16.
Pull down on the parking brake cable that runs down the driver’s side frame rail.
Clamp the cable where it runs through the front body mount so it stays slack
Figure 12
.
