RideCam™ User’s Manual
P a g e
7
| 7
Ext 285
Configuration
This section reviews how Tier Three Support will troubleshoot the device. The section is not customer
facing and is included in required FCC documentation ONLY.
Connection
1. Power on the RideCam camera.
2. On a Wi-Fi enabled device, connect to the “Wi-Fi AP” access point.
3. If a password is required, the default is 78932100 but a soft reset of the device may be required prior to
password entry.
4. Launch a web browser and input the local IP address of the RideCam. This is
typicallyhttp://192.168.1.202 but a soft reset of the device may be required to access.
5. Enter the Account name as “Admin” and password as “111111” without the quotation marks. A soft reset
of the device may be required to access.
Figure 1
6. In the navigation bar at the top of the screen, click “Configuration” to check the parameters.
Figure 2
