RideCam™ User’s Manual
P a g e
6
| 7
Installation
What’s in the box
•
RideCam camera
•
Mounting bracket
•
Power cable
!
NOTE:Zone Defense part number R.AVS.RC.V1 uses a USB power cable and contains a dual USB car
charger.
!
NOTE: Zone Defense part number R.AVS.RC.V2 uses an in-line power cable and does not contain a dual
USB car charger.
Installation Instructions
1. Ensure camera faces out the front of the windshield and that the field of vision is not obstructed.
2. Remove the cover from the adhesive mount and camera lens.
3. Apply camera to the interior of the windshield in a horizontal direction directly under or in place of the
rear-view mirror.
4. Install power cable to camera so as not to obstruct the view out of the windshield.
5. For R.AVS.RC.V1: Connect power cable to USB cigarette lighter adapter. For R.AVS.RC.V2: Connect
ground and ignition wires for power.
6. Activate the mobile application using the instructions you received via electronic mail.
7. Once installed, it is not recommended to move the adhesive bracket to another position on a windshield
or a rear window.
1 (866) 672 – 1212
www.ZoneDefense.Camera
Inquiries
Worldwide Headquarters
2135 13th Avenue North
Saint Petersburg, FL 33713, USA
Canadian Sales and Distribution
7895 49th Avenue, Unit 1
Red Deer, AB T4P 2B4, Canada
Technical Support
+1 (866) 672-1212
Hardware Support
Ext 718
Software Support
