- 20 -
2)
Security Settings:
Use this menu to protect the phone against unauthorized use by
managing the several access codes of your phone and SIM card. When the phone
asks for entering any one of the following code, input the correct code (displaying “*”
on the screen), then press <Accept>. If you enter an incorrect code, press <Delete> to
delete the wrong entries and then enter the right one. Security settings include
Change PIN1, Chang PIN2, Phone Code, etc.
Power on PIN1: PIN1 is used to prevent your SIM card from misuse. The
following options are available:
i) On: If your current PIN1 is set to Off, select On and enter correct PIN1
code to activate this feature. If the PIN1 activates, it is requested each time
the phone is switched on. SIM card is protected by PIN1 code.
ii) Off: If your current PIN1 code is set to On, select Off and enter correct
PIN1 code to deactivate this feature.
iii) Change PIN1: allows you to change your current PIN1 to a new one,
provided that the Power On PIN1 is set to ON. You must enter the current PIN1
before you can specify a new one. Once you have entered a new PIN1, you are
asked to confirm it by entering it again.
※
Note
：
If the PIN1 is entered incorrectly three times, the SIM card is barred. You have to
enter PUK to unlock SIM card. PIN1 and PUK codes may be provided together. If you do
not know your PIN1 and PUK, please contact your service provider. Generally, the
default PIN1 is 1234, please change it to your own number as soon as possible.
※
Change PIN2: enter the current PIN2, then you can set the PIN2.
Phone Code: This menu allows you to lock/unlock your phone, Phone code is
needed when you operate this option. When activated, you must enter a phone
code each time you switch your phone on or replace SIM card. You can set the
phone code to On/Off, or change phone code. For detail steps, reference Power
On PIN1.
※
Note: It is 4-to-8 digit phone code. The default code is 0000.
※
3)
Clock settings
Set the time and date of mobile phone as well as the display format in idle mode.
a)
Date & Time settings:
Press <Selsect><Accept> soft key to access this menu,
and press numeric keys or up and down navigation keys to enter the present time
and date, then press left soft key for confirmation.
b)
Date format:
The date format can be set to
DD-MM-YY,MM-DD-YY,DD-MM-YYYY,MM-DD-YYYY,M-D-YY,D-M-YY,M-D-YY
YY,D-M-YYYY,DD-MMM-YY,DD-MMM-YYYY.
c)
Date separator:
You can set separator for date format.
d)
Time format:
You can select 12 hours or 24 hours as time display format.
4) Own Number: allows you to edit your own phone number. You can edit two phone
numbers.
5) Keypad Locking Settings: Allow you to set keypad lock way. You can select Disable,
30 seconds, or 60 seconds.
6) Factory Default: in this menu, enter your phone code (the initial value is 0000) and
press <Accept> to reset your phone to its default settings.
