4/10/2019
V4 User Manual and Installation Guide – Zonar Systems Support
https://support.zonarsystems.net/hc/en-us/articles/360017847851-V4-User-Manual-and-Installation-Guide
4/27
6
- External GPS antenna guidelines
If used
7
- Discrete input system instructions
If used
8
Disconnect vehicle battery ground cable
Suggested
9
Install V4 Power/Data cable. Do not connect 4-pin connector to V4 at this time. Do not
connect OBDII connector to vehicle at this time (if used).
Required
10 Install Discrete IO cable
If used
11 Install external GPS antenna
If used
12 Install V4 mount plate and V4
Required
13 Interconnect all cables & wires to V4 (except 4-pin power)
Required
14 Reconnect vehicle battery ground cable
Suggested
15 Connect 4-pin power cable to V4
Required
16 Start engine
Required
17 Connect OBDII connector to vehicle (if used)
Required
18 Complete V4 System function checkout checklist
Required
19 Shut down engine
Required
V4 Equipment
A. V4 GPS Unit
B. V4 Mounting Plate and Mounting Screws (Provided)
C. GPS Antenna (Optional)
D. GPS Antenna Adhesive Tag (Optional - used for non-magnetic roo op GPS Antenna installs)
Note:
See External GPS for detailed information on GPS antenna requirements and recommendations.
