Before switching it on, check that you
have all the relevant components:
cord and Air+ 600i purifier.
Locate a power socket to connect the
Air+ 600i and plug the unit into the
socket using the power cord.
Wait about 10 seconds until the dis
-
play performs the function test. when
it remains in WAIT, press the button
“ON”.
It takes about 6 seconds to start
the engine. Then, press and hold
the upload button speed “ “ a few
seconds until it reaches the requierd
position.
After having checked its operation, it
is advisable to set the regulator to its
maximum speed (Hi) for the first 10
minutres, to exectue a deep cleaning
of the room.
Then, it is recommended to leave it
below medium speed, at 30-40, to
mantain optimal recirculation and
comfort speed.
FAQs
Should I unplug Air+ 600i when not in use?
We recommend unplugging Air+ 600i when not
in use so as to fully disconnect it from any power
source and thus protect it against any possible
electrical fault caused by external factors.
How long can the motor be left running?
As long as you like.
How much does my Air+ 600i consume?
Air+600i consumes 169w at full power. At me-
dium performance, consumption is approx. 67w.
How often should I change the filters of my Air+
600i?
Zonair3D recommends, for an estimated use of
8 hours a day, to change the G4 pre-filter once a
year, the GRSYSTEM gas filter every 2 years and
the H14 absolute filter every 4 years.
Does Air+ 600i have any contraindications or
side effects?
It has no contraindications or side-effects and it
improves quality of life for those who use it.
Breathing pure air for as long as you like enables
you to better deal with the environment.
Switching off and disco
-
nection Air+ 600
i
Switching on and operating
Air+
600
i
1
4
2
5
3
6
To
turn off the equipment, press
the ON/OFF button.
If you are going to stop using the
purifier for a long period of time,
it is recommended to disconnect
from the power supply.
