Zonair3D AIR+ 300 S, User Manual

Page: 22 / 68

Air+ 300 S & 430 S · Page 22
Switching on and operating the Air+ 300 S / 430 S
The equipment you have purchased is plug & play, which
means it does not need any prior configuration.
Before switching it on, check that you have all the
relevant components: cord and Air+ 300 S / 430 S air
purifier.
Locate a power socket to connect the Air+ 300 S / 430 S
and plug the unit into the socket using the power cord.
To switch the equipment on, double click on the power
button (ON / OFF) and the screen and its perimeter light
will illuminate.
Select speed mode and increase speed to maximum (10).
(See point 1, page 21).
After having checked its proper operation, it is
recommended to set the purifier at its maximum speed
during the first 10 minutes to execute a deep cleaning of
the room.
Then, it is recommended to leave it at medium speed,
below 5, to maintain optimal recirculation and comfort
speed.
To set automatic unit shutdown, use the timer button
(see point 2, page 21) and select the required operating
time, selecting the desired operating time.
The screen switches off automatically after 1 minute of
inactivity.
Product performance
But, if you want to turn off the lights on the screen in that very
moment, click once on the ON / OFF button.
The proximity sensor detects the movement of your hand as it
passes over and turns the screen back on.
Switching off and disconection of Air+ 300 / 430 s
To switch off the unit, press and hold on the ON / OFF button
for 3 seconds.
If the purifier is not to be used for long periods, disconnect the
power cord.
1
2
3
4
5
6
7