4
INSTALLATION YOURICEMAKER
INSTALL YOUR ICE MAKER
1. Remove the exterior and interior packaging, check the maker for damage carefully, then
take out the accessory from the ice bucket, then clean the interior ice bucket.
2. Place the ice maker on the flat and solid ground surface.
3. The ice maker is not for outdoor use, please use it under ambient temperature 10
℃
-32
℃
, and water temperature less than 30
℃
, high temperature may decrease the ice
output capacity.
4. To maximum the efficiency of ice maker, the ice maker should at least keep a certain
distance from the wall or other equipment around it (as following table).
Side of ice maker
Distance of ice maker to wall or equipment(cm)
Side
15
Back
20
Front
50
5. The ice maker shall be installed where is easy for water drain away, and protected from
direct sunlight, don't put it aside by high temperature equipment (Refrigerator, oven).
6. The appliance must be positioned so that the plug is accessible.