ZOLL SurePower Single Bay Charger, Operator'S Manual, Page: 36 / 44

M
AINTENANCE AND
T
ROUBLESHOOTING
4-2 www.zoll.com 9650-000272-05 Rev. B
Troubleshooting
The following troubleshooting procedures are for use of non-technical personal using the
SurePower Single Bay Charger . This section addresses many common problems or questions
that can arise during operation.
If problems persist after you perform these troubleshooting procedures, contact the ZOLL
Technical Service Department or your authorized ZOLL representative
1. Power LED does not light.
•
Check that the charger is plugged into an appropriate power source.
•
Check that the power cord is securely inserted into the charger.
•
Check for a defective power cord.
•
Plug the charger into a different power source.
2.
Charging LED does not light when a battery is in the battery bay.
•
Check to see if the charger is in the drain phase of the battery bay ( Test LED is illuminated).
•
Check that the battery is properly seated in the bay.
•
Check that the contacts are clean and not damaged.
•
Use another battery that you know is good.
3.
Test LED does not light when you press the Test button.
•
Check that the battery is properly seated in the bay.
•
Check that the contacts are clean and not damaged.
•
Use another battery that you know is good.
4.
Battery fails test cycle (both the Fault and Test LEDs light).
•
Battery end of life. Remove from service .
5.
Fault LED lights when battery pack is inserted into the SurePower Single Bay Charger .
•
Check that battery pack is seated correctly in charging bay.
•
Check that battery contacts are clean and not damaged.
6.
Beeper does not sound.
•
Try to enable the audible alarm as described in Chapter 3.
Proper maintenance of the SurePower Single Bay Charger , and understanding how to deal with
operational problems, helps ensure the usability of the unit.
Warning! There are no user-serviceable parts in the SurePower Single Bay Charger . Do not remove
the bottom metal plate from the
SurePower Single Bay Charger
—removing the bottom
plate from the unit will expose you to dangerous electrical current.