Quick Reference Guide
1. Connect the appropriate sensor cable to
the Propaq MD unit.
2. Apply probe to patient.
The pleth waveform and oxygen saturation
value will automatically appear on the
screen when a signal has been detected.
SpO
2
Monitoring
1. Press & to highlight
the Gain Label above the pleth
waveform. Press .
2. Press & to highlight
the desired waveform size.
Press .
Changing the Waveform Gain
1. Press & to highlight the
Source Label above the pleth
waveform. Press .
2. Press to highlight
Remove
.
Press .
Removing the Pleth Waveform
SpO
2
Probe Connection
Note: You can add the pleth waveform back to the display by
selecting
Insert
from the Source Label menu or by reconnecting the
sensor to the Propaq MD unit and the patient.
All manuals and user guides at all-guides.com
all-guides.com
