manualshive.com logo in svg

ZOLL LifeVest 4000, Patient Manual, Page: 20 / 144

Share
Download
ZOLL LifeVest 4000 Patient Manual Download Page 20

LifeVest 4000 Patient Manual 

Page 2-4 

 

Charger 

The charger with touchscreen charges the battery and transmits data. The 
charger with indicator lights charges the battery and the hotspot transmits data.   

The LifeVest system includes two batteries so that the monitor can run 
continuously on battery power. For details on battery care, see section 3. 

There are two types of chargers: One has a touchscreen and is described below. 
The other has indicators and is described on the next page. You will receive one 
or the other. They both perform the same function of charging the battery and 
transmitting data. 

Charger with touchscreen 

 

  Item 

Description 

1  Touchscreen 

Displays messages about device operation and allows patient to interact with device. For more on 
the charger touchscreen, see page 2-7.  

2  Battery 

Shown charging in charger while other battery is in monitor. 

3  Antenna 

Raise the antenna for best reception for transmitting data. 

4  Power supply 

Plugs into a standard power outlet to provide power to the charger. 

5 Power 

supply 

connector 

Connects the power supply to the charger. 

6  Phone jacks 

Connects the charger to a phone line. Only use if instructed by ZOLL. 

7  USB connector 

Do not use. Do not connect anything to this connector. 

8 Ethernet 

connection 

Do not use. Do not connect anything to this connector. 

Summary of Contents for LifeVest 4000

















































































































































Reviews:

No comments