ZOLL LifeVest 4000, Patient Manual, Page: 123 / 144

Using the activities options
Walk test messages
As you take the walk test, you may get one of these messages. If so, here is
what the message means and what you should do.
If you get any other messages, see Section 5, Responding to alarms .
Message What it means What to do
You are attempting to take the walk test with
the electrode belt disconnected.
The belt needs to be connected to take the
walk test.
Wear the LifeVest and connect the electrode
belt to the monitor.
After connecting the electrode belt, the
message goes away.
Try again to take the walk test.
You are attempting to take the walk test and
the LifeVest is advising you not to take the walk
test at this time.
Tap OK to clear the message.
Try again later (or wait until tomorrow).
You are attempting to take the walk test more
frequently than scheduled.
Tap OK to clear the message.
Wait until you get this message:
Page 6-25