Installation and Operation
6
Zolix Instruments Co., Ltd.
http://www.zolix.com.cn E-mail: [email protected]
5. Installation & Operation
5.1. Installation
5.1.1 USB Software Installatio
XP and Win7 system
：
1. Firstly ensure the Power switch on the rear of the spectrograph is set to 0.
2. Connect the Power & USB cables.
NOTE: Do not switch on the spectrograph at this stage.
3. Connect the other end of the USB cable to the PC and plug in the power supply to the mains, but
do not switch the power on.
4. Put the CD into the PC CD-ROM,switch the power on to the spectrograph.A dialog box should then
appear as the following:
5. Select the Install from a list or specific location (Advanced) option then click Next>. A dialog box
similar to the following should appear:
6. In the Browse Folder dialog box, find the USB driver in the CD and install it. IF your PC is 64-bit,
please select USB Driver-64 bit.
