background image

Safety Guidelines

This Product is not intended for use by persons under the age of 18. Keep out of reach of children.

 1. Keep children away when operating the product.
2. Do not stare at the light source as it may cause permanent eye damage.
3. Wear gloves before touching heated surfaces of the product to prevent burns.
4. Wear gloves when touching sharp edges and corners of the product to prevent cuts.
5. Position the power cables so that it will not be tripped over, or accidentally pulled out causing the product to shut down.
6. If an extension power cable is required, the minimum amperage rating should not be less than that of the product’s 
  

  

own power cable. 

7.

 

When using the device with AC DC Power Adapter, connect it to a grounded power outlet.

8. Do not place the product near any flammable and/or volatile liquid to prevent potential damages.
9. ZOLAR® Blade 60C is rated IP65. ZOLAR® Blade 60C must NOT be submerged in water.
10. If using the ZOLAR® Blade 60C near water or in the rain, it is recommended to use an earth leakage circuit 
      breaker (RCD or GFI) to protect the user and the device.

4

Preface

Please read this document carefully in order to understand the ZOLAR® Blade 60C (hereinafter collectively referred to 
as “this Product”) and use it reasonably. Refer to the official website (www.z-cam.com/zolar) for the latest version of this 
document and updated product information.

Please contact Shenzhen ImagineVision Technology Limited  (hereinafter referred to as “ImagineVision”) or its authorized 
distributors/resellers, in case of any product queries about installation or operation.

Before You Begin

Please read and follow this Safety Guideline and all the terms associated to this Product carefully, to know your legal 
rights, responsibilities, and safety instructions, otherwise, it may result in product damages, safety accidents and 
personal injuries. By using this Product, you hereby signify that you have read, understood, acknowledged and accepted
this Safety Guideline and all the terms and conditions associated with this Product, and assume responsibility for any 
behaviors or consequences. You undertake to use this Product on normal and reasonable purpose, and agree to this 
Guideline and all the terms and conditions associated with this Product, as added, reduced, amended, modified made 
by ImagineVision from time to time.

ImagineVision provides no expressed or implied guarantee in relation to this Product, assumes no loss or legal 
responsibility raised from misuse of this Product contrary to this Safety Guideline and the terms associated to this 
Product, accepts no indirect, consequent, punitive,  occasional, special, criminal-punitive loss or legal responsibility. 
Under any circumstances, the total liability of ImagineVision shall NOT exceed the price paid by you to ImagineVision 
for the product.

Summary of Contents for Blade 60C











Reviews: