make repairs as necessary: (1) interlock operation, (2) proper
door closing, (3) seal and sealing surfaces (arcing, wear, and
other damage), (4) damage to or loosening of hinges and latches,
(5) evidence of dropping or abuse.
(c) Before turning on microwave power for any service test or
inspection within the microwave generating compartments, check
the magnetron, wave guide or transmission line, and cavity for
proper alignment, integrity, and connection.
(d) Any defective or misadjusted components in the interlock,
monitor, door seal, and microwave generation and transmission
systems shall be repaired, replaced, or adjusted by procedures
described in this manual before the oven is released to the owner.
(e) A microwave leakage check to verify compliance with the
Federal Performance Standard should be performed on each
oven prior to release to the owner.
GROUNDING INSTRUCTI
ONS
This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance is
equipped with a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING – Improper use of the grounding can result in a risk of
electric shock. Consult a qualified electrician or serviceman if the
grounding instructions are not completely understood, or if doubt
exists as to whether the appliance is properly grounded, and
either:
1) If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug, and a 3-slot
receptacle that will accept the plug on the appliance. The marked
rating of the extension cord shall be equal to or greater than the
electrical rating of the appliance, or
2) Do not use an extension cord. If the power supply cord is too
short, have a qualified electrician or serviceman installs an outlet
near the appliance.
10
