18
19
CLEANING AND MAINTENANCE
IF THERE IS AN ODOR
THE EXTERIOR
INNER COOKING PAN (
→
pg. 5) / SPATULA
MEASURING CUP / SPATULA STAND
Fill the Inner Cooking Pan with water up to
water level 1 for WHITE.
●
Do not put other matter such as kitchen
detergents in the Inner Cooking Pan.
Close the Outer Lid and press the button
to select the QUICK COOKING menu setting.
Press the button.
1
2
When the Rice Cooker completes cooking
and switches to Keep Warm mode,
press the button.
Wait until the Main Body cools down, discard
the water and clean accordingly.
●
Open the Outer Lid and dry the Rice Cooker in
a well ventilated place.
4
5
3
Wash using a neutral kitchen detergent and a soft sponge.
●
Be sure to unplug the Power Cord and allow the Main Body and the Inner Cooking
Pan to cool down.
●
Do not use such items as thinner, benzine, abrasive cleaners, bleach, scrubbing
brushes (nylon, metal, etc.), melamine sponges or sponges with a nylon surface.
(Doing so may damage the surface, causing discoloration, scratches, degradation in
quality, or corrosion.)
●
Do not use a dishwasher or dish-dryer. Doing so may cause scratches, deformation or discoloration.
●
Be sure to reattach the Inner Lid Set and Steam Vent Cap correctly.
●
Do not use polishing powder,
metal or nylon scrubbing
brushes.
●
Handle gently. Do not strike
it or rub it too hard.
●
Clean the Rice Cooker thoroughly
after every use.
Do not wash
using sponges with
hard surfaces.
Wash using a soft sponge.
To wash thoroughly, use a neutral kitchen detergent.
Wipe clean with a well-wrung soft cloth.
●
If using a cloth that is chemically treated, use sparingly to avoid transferring the chemical smell and
do not scrub the Rice Cooker forcefully.
(Doing so may damage the surface, causing discoloration, scratches, degradation in quality, or corrosion.)
Open Button
If the Open Button becomes clogged
with rice or other matter, remove with
a bamboo stick.
●
The Outer Lid may not open.
Steam Vent Cap
Wash under running water and
dry thoroughly.
Steam Vent Cap Receptacle
Remove the Steam Vent Cap,
and wipe the Outer Lid with a
well-wrung soft cloth.
Plug Receptacle
Wipe with a dry soft cloth.
Control Panel
Wipe with a dry soft cloth.
●
Using the Rice Cooker with clogged Air
Vent may cause the internal
temperature to become abnormally
high, resulting in breakdown.
Air Vent
Clean using a vacuum cleaner (once a month).
Air Vent
Bottom view of the product
THE INTERIOR
•
Please replace damaged parts for optimum performance.
•
When replacing parts, please check the model number
and the parts name beforehand, then contact the store
where you purchased the Rice Cooker.
REPLACEMENT PARTS
C206-WH
B495-6B
BE243033L-00
BE643037L-00
615784-00
Parts Names
Parts Number
Inner Lid Set
Inner Lid Gasket
Rinse in hot or cold water, wash using
a soft sponge, and dry thoroughly.
•
Remove rice or other matter. If not
removed, steam may leak through, rice
may dry, or cooking and Keep Warm may
be imperfect.
•
The Inner Lid Gasket cannot be removed.
•
Be sure to clean the Inner Lid Set after
every use; otherwise, it may rust or
become discolored.
Outer Lid
Steam Vent
Hold the Outer Lid securely and wipe
with a well-wrung soft cloth.
Remove any rice or residue on the
inside of the Outer Lid.
•
Do not use kitchen detergents.
Center Sensor
Wipe with a well-wrung soft cloth.
If it becomes clogged with rice or
other matter, remove with a
bamboo stick.
Heating Plate
Wipe the surface with a well-wrung
soft cloth.
If rice or other matter become stuck
to the Heating Plate, lightly polish
them off with a sand paper of about
No.320 after dipping in water.
If it becomes clogged with rice or
other matter, remove with a
bamboo stick.
•
Leaving rice, other matter or
moisture on the surface may
cause the Outer Lid to rust or
discolor.
Inner Lid Set
Inner Cooking Pan
Spatula
Spatula Stand
Measuring Cup
②
①
Inner Lid Set Holder
Inner Lid Knob
•
Do not pull the Inner Lid Knobs
toward you without pressing the
Inner Lid Set Holder.
(May cause the Inner Lid Set and
Outer Lid to break.)
HOW TO DETACH AND ATTACH THE INNER LID SET
How to detach the Inner Lid Set:
Hold the Inner Lid Knob (
①
) and push up the Inner
Lid Set Holder (
②
) to detach.
How to attach the Inner Lid Set:
Insert the fixtures found at the bottom sides of the
Inner Lid Set into the Outer Lid and push it toward
the Outer Lid until you hear it click into place.
Inner Lid
Set Holder
Steam Vent
Gasket
Fixtures
Enlarged illustration
Fixture Holders
Appliance Plug
Power
Plug
Power
Cord
Wipe with a dry soft cloth.
